> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.simplyprint.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Bambu Lab integration: supported and recommended hardware


# Bambu Lab Integration: Supported and Recommended Hardware

The SimplyPrint Bambu Lab integration allows you to connect your Bambu Lab printers to our platform using an external device. This guide covers the supported and recommended hardware options for running the SimplyPrint Bambu Lab Client.

## Recommended Hardware Options

To ensure **stable and reliable** performance, we recommend using one of the following devices:

### Raspberry Pi (Recommended)

**Models supported**: Raspberry Pi 3B, 3B+, 4B, 5  
**Minimum RAM**: 2GB (recommended)  
**Setup**: The SimplyPrint Bambu Lab Client can be installed on a Raspberry Pi running Raspberry Pi OS.

#### Advantages

* Runs 24/7 with minimal power consumption
* Small and reliable
* No interruptions due to OS updates (compared to Windows/macOS)

**Setup Guide:** [SimplyPrint Raspberry Pi Setup Guide](https://simplyprint.io/setup-guide#bambu:1-raspberrypi)

### Linux Computer (Highly Recommended)

**OS Compatibility**: Ubuntu, Debian, and most modern Linux distributions  
**Minimum RAM**: 2GB

#### Advantages

* Stable and lightweight
* Works well with server environments

**Setup Guide:** [SimplyPrint Linux Setup Guide](https://simplyprint.io/setup-guide#bambu:1-linux)

### Mac Computer

**OS Compatibility**: macOS Ventura (13) and newer  
**Minimum RAM**: 4GB

#### Considerations

* macOS updates may interfere with stability
* Less suitable for running 24/7

**Setup Guide:** [SimplyPrint Mac Setup Guide](https://simplyprint.io/setup-guide#bambu:1-mac)

### Windows Computer

**OS Compatibility**: Windows 10, 11 (64-bit only)  
**Minimum RAM**: 4GB

#### Considerations

* Windows updates can occasionally cause unexpected reboots, which may disrupt the connection between printer and SimplyPrint. This will not disrupt prints thoigh.
* Webcams can sometimes be more challenging to run compared to other platforms, **especially in LAN-mode**.
* Many users successfully run the SimplyPrint Bambu Lab Client on Windows without issues, but among those who experience problems, Windows is the most common OS involved.

**Setup Guide:** [SimplyPrint Windows Setup Guide](https://simplyprint.io/setup-guide#bambu:1-windows)

## Network Requirements

**LAN-mode printers: same Network**: If your printers run in LAN-mode, the device running the SimplyPrint Bambu Lab Client **must be connected to the same network as your Bambu Lab printers**.  
**Stable Connection**: A stable Wi-Fi or Ethernet connection is required for optimal performance.  
**Impact of Poor Connection**: A **poor internet connection may slow down performance**, causing **delays when sending files to the printer or streaming the webcam**. For best results, ensure a **strong and stable** connection.

## Troubleshooting & Support

If you have any issues during setup, check our [troubleshooting guide](https://help.simplyprint.io/en/article/bambu-lab-client-setup-troubleshooting-guide-xb0jix/) or **join our Discord server** for support: [SimplyPrint Discord](https://simplyprint.io/discord/).

*-------* **

By using one of the recommended setups above, you can ensure a smooth and reliable experience with SimplyPrint and Bambu Lab printers!