> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.simplyprint.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Elegoo Centauri Carbon 2 and the Canvas: which model to pick and setting up the Canvas

# Elegoo Centauri Carbon 2 and the Canvas: which model to pick and setting up the Canvas

The Elegoo Centauri Carbon 2 connects to SimplyPrint through the SimplyPrint Client. If yours came with the Canvas, the four-spool multi-material unit, SimplyPrint reads the Canvas from the printer for you. This guide covers which model to pick, how to connect it, and what to do when the Canvas does not show up.

## In this guide
* [Which model to pick](#2-which-model-to-pick)
* [Connect your Centauri Carbon 2](#2-connect-your-centauri-carbon-2)
* [How SimplyPrint gets your Canvas](#2-how-simplyprint-gets-your-canvas)
* [The Canvas does not show up or is not saved](#2-the-canvas-does-not-show-up-or-is-not-saved)
* [Related articles](#2-related-articles)

## Which model to pick
When SimplyPrint asks for your printer model, for example in the setup guide or on the compatibility list:

| You have | Pick |
| -------- | ---- |
| Centauri Carbon 2 without a Canvas | **Centauri Carbon 2** |
| Centauri Carbon 2 that came with a Canvas (the Combo) | **Centauri Carbon 2 Combo** |
| The first Centauri Carbon with a Canvas added | **Centauri Carbon Canvas** |

"Centauri Carbon Canvas" is the first Centauri Carbon with the Canvas add-on. It is not a Centauri Carbon 2, even if your Centauri Carbon 2 came with a Canvas.

|| On the first Centauri Carbon, SimplyPrint does not read the Canvas yet: it doesn't sync the Canvas slots or map your file's filaments to them. The printer itself still works with SimplyPrint. Canvas sync and mapping work on the Centauri Carbon 2 only.

In the SimplyPrint Client, both Centauri Carbon 2 versions are one choice: **Elegoo Centauri Carbon 2**.

## Connect your Centauri Carbon 2
|| The Centauri Carbon 2 needs its access code. You find it on the printer's LAN Only screen. It is case sensitive.

1. In the SimplyPrint Client, choose **Add printer** > **Elegoo**.
2. Pick **Elegoo Centauri Carbon 2**.
3. Enter the printer's IP address and its access code.
4. Enter the setup code the Client shows in SimplyPrint.

Check: the printer shows as online in SimplyPrint.

If the Client says it cannot connect, check the access code first. The Centauri Carbon 2 uses a different connection from the first Centauri Carbon, so picking **Elegoo Centauri Carbon** for a Centauri Carbon 2 does not work either.

## How SimplyPrint gets your Canvas
You do not add the Canvas by hand. With the Canvas connected to your Centauri Carbon 2, the SimplyPrint Client reads it from the printer:

* SimplyPrint shows the Canvas's four slots and the material type and colour in each.
* When you start a print, SimplyPrint maps the filaments in your file to the Canvas slots.

When the printer reports its multi-material setup, SimplyPrint uses that instead of a setup added by hand.

## The Canvas does not show up or is not saved
|| The refresh button only shows while the printer is online, and only to users with the "Change filament" permission.

1. Check that the Canvas is connected and shows on the printer's own screen.
2. Check that the printer was added in the Client as **Elegoo Centauri Carbon 2**. The Client only reads the Canvas on a Centauri Carbon 2.
3. Press the refresh button: the circular arrows icon next to the gear icon in the filament section of the printer's page. It asks the printer for the Canvas again.

Check: the four Canvas slots show with the material that is loaded in each.

## Related articles
* [Connect your printers with the SimplyPrint Client](https://help.simplyprint.io/en/article/connect-your-printers-with-the-simplyprint-client-nxcgz1/)
* [Why is my Elegoo printer offline?](https://help.simplyprint.io/en/article/why-is-my-elegoo-printer-offline-1gvjeyc/)
* [The Elegoo material standard: NFC/RFID for the Elegoo Canvas](https://help.simplyprint.io/en/article/the-elegoo-material-standard-nfcrfid-for-the-elegoo-canvas-r97p7d/)
* [Multi-material printing in SimplyPrint: mapping and syncing your AMS, ACE or CFS](https://help.simplyprint.io/en/article/multi-material-printing-in-simplyprint-mapping-and-syncing-your-ams-ace-or-cfs-1uc6w3h/)
* [The ElegooSlicer SimplyPrint integration](https://help.simplyprint.io/en/article/the-elegooslicer-simplyprint-integration-how-to-set-up-and-use-100a9k9/)