> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.simplyprint.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Webcams in SimplyPrint: frame rate per plan, choppy streams and external cameras

# Webcams in SimplyPrint: frame rate per plan, choppy streams and external cameras

This guide explains how often the SimplyPrint webcam stream updates on each plan, what to check when a stream looks jerky or slow, how to turn a camera back on after switching it off, and how to use an external camera, including on Prusa and Creality K2 printers connected through the SimplyPrint Client.

## Table of contents
- [How often the stream updates on each plan](#2-how-often-the-stream-updates-on-each-plan)
- [My stream is choppy or slow](#2-my-stream-is-choppy-or-slow)
- [Watching all your cameras at once](#2-watching-all-your-cameras-at-once)
- [I turned the camera off and can't get it back](#2-i-turned-the-camera-off-and-cant-get-it-back)
- [Using an external camera](#2-using-an-external-camera)
- [Creality K2 cameras through the SimplyPrint Client](#2-creality-k2-cameras-through-the-simplyprint-client)
- [Camera snapshots in notifications](#2-camera-snapshots-in-notifications)
- [Related articles](#2-related-articles)

## How often the stream updates on each plan
The SimplyPrint stream is a series of still pictures from your printer's camera, not a video. Your plan decides how often a new picture arrives:

| Plan | New frame every |
| ---- | ---- |
| Free | 6 seconds |
| Basic | 4 seconds |
| Pro | 0.75 seconds |
| Print Farm | 0.5 seconds |
| Enterprise | 0.5 seconds |
| School (Education) | 0.75 seconds |
| Filament Manager | 6 seconds |
| Cloud Slicer | 6 seconds |

On Free and Basic, a countdown to the next frame shows in the bottom-left corner of the stream. On faster plans it says **live** instead. If a faster plan is available to you, the stream also shows a "Stream can be up to ...x faster!" banner with an **Upgrade** button.

The [pricing page](https://simplyprint.io/pricing) lists the stream speed for every plan under "Livestream monitoring".

## My stream is choppy or slow
Work through these in order.

1. **Check your plan's frame interval.** On Free (one frame every 6 seconds) and Basic (every 4 seconds) the stream is meant to move in steps, like a slideshow. That is the plan limit, not a fault.
   **Check:** a countdown in the bottom-left corner of the stream means you're on a slower interval.
2. **Look for a Wi-Fi warning icon next to the countdown or "live" label.** On Pro and higher plans, SimplyPrint adds half a second between frames when the connection between your printer and SimplyPrint is slow (high ping). Hover the icon and it says "Stream speed has been lowered due to a bad connection (latency / ping too high)". Improve the network connection of the printer, or of the computer or Raspberry Pi that connects it to SimplyPrint.
   **Check:** once the connection is faster, the icon goes away and the stream speeds up again.
3. **Read the label in the bottom-left corner.** "No internet" or "No connection" means the device *you're watching on* has lost its connection to SimplyPrint, not the printer.
   **Check:** reload the page once your own connection is back.
4. **Bambu Lab printers:** some models need **LAN Mode Liveview** turned on in the printer's settings before the camera works at all. Follow the [Bambu Lab webcam not working guide](https://help.simplyprint.io/en/article/bambu-lab-webcam-not-working-guide-pw6z3q/).
5. **On mobile data:** the stream may not load until you tap it, depending on your webcam auto-load setting. See [How to reduce webcam data usage on mobile](https://help.simplyprint.io/en/article/how-to-reduce-webcam-data-usage-on-mobile-1rtt9zi/).

## Watching all your cameras at once
|| Watching several camera streams at once is part of the Pro plan and higher.

1. Go to **Printers**.
2. Click the camera button on the printers overview.

**Check:** each printer card switches to its live camera. On Free and Basic you'll see example streams and an upgrade prompt instead.

To open the overview in camera view every time, go to **Settings > Printers** and turn on **Enable camera view by default on the printers overview**. Only the printer cards you can see on screen load their stream, which keeps bandwidth down.

## I turned the camera off and can't get it back
A camera can be switched off in four places. Check them in this order.

1. **The printer's settings.** Open the printer's settings, go to **Modifications > Webcam**, and tick **Printer has a webcam**. The help text there mentions a Raspberry Pi; the checkbox itself is there for every printer.
   **Check:** the camera shows on the printer's card again.
2. **The SimplyPrint Client.** If the printer is connected through the SimplyPrint Client, open the Client, go to **Settings > General**, and turn off **Disable webcam streaming**. This setting covers every printer on that Client.
   **Check:** live views come back for that Client's printers.
3. **Your browser.** Click your profile icon, then **Your account > Local preferences**, and look at **Webcam auto-load**. With **Never auto-load** the camera stays collapsed until you click it. This setting only affects the browser you set it in.
   **Check:** opening a printer starts the stream.
4. **Your user group.** An account admin can check that your user group has the **See camera** permission. See [User groups and permissions](https://help.simplyprint.io/en/article/user-groups-and-permissions-what-each-one-controls-1284ueh/).
   **Check:** after the permission is added, reload the page and the camera shows.

## Using an external camera
SimplyPrint uses one camera per printer. If you add an external camera, it replaces the printer's built-in one in SimplyPrint. More in [Can I connect multiple cameras to one printer?](https://help.simplyprint.io/en/article/can-i-connect-multiple-cameras-to-one-printer-in-simplyprint-1gcahd5/)

### Printers connected through the SimplyPrint Client
1. When you add a printer in the Client, look for **Custom webcam URL** under **Advanced**, in the step where you enter the printer's address. Fill in the address of the camera's stream or snapshot. For Bambu Lab, Prusa and Duet printers you can also add or change it later in the printer's settings in the Client.
2. Leave the field blank to use the printer's own camera.

**Check:** the external camera's picture shows on the printer's card in SimplyPrint.

**Prusa printers:** SimplyPrint doesn't show a Prusa printer's own camera (the Prusa camera on the CORE One, MK4S and others). To watch a Prusa printer in SimplyPrint, use a camera that gives a snapshot or MJPEG stream address:

* **Through the SimplyPrint Client:** give the printer a Custom webcam URL, as above. The Client doesn't read any camera from Prusa printers over PrusaLink, so without one there is no camera.
* **Through OctoPrint:** use a USB camera or Pi camera on the OctoPrint device (see below).
* **With the Prusa direct firmware connection:** there is no camera.

### OctoPrint and Klipper printers
For a USB camera or Pi camera on OctoPrint, see [Set up a Webcam or PiCam for OctoPrint & SimplyPrint](https://help.simplyprint.io/en/article/set-up-a-webcam-or-picam-for-octoprint-simplyprint-n8lp86/). For Klipper printers (Mainsail, Fluidd, Moonraker), see [Webcam not detected for Klipper-based printers](https://help.simplyprint.io/en/article/webcam-not-detected-in-simplyprint-for-klipper-based-printer-mainsail-fluidd-moonraker-mewdfx/).

## Creality K2 cameras through the SimplyPrint Client
When a Creality K2 is connected through the SimplyPrint Client, the Client looks for the printer's built-in camera by itself. There is nothing to set up on the printer.

If the camera doesn't show:
1. Update the SimplyPrint Client to the latest version.
2. Check the four places in [I turned the camera off and can't get it back](#2-i-turned-the-camera-off-and-cant-get-it-back).

**Check:** the K2's camera shows on its printer card.

If your K2 is connected with the on-printer Klipper method instead, see [Creality K1 / K1C / K1 Max camera not working](https://help.simplyprint.io/en/article/creality-k1-k1c-k1-max-camera-not-working-how-to-fix-1fvuuz4/), which has a K2 section.

## Camera snapshots in notifications
When the printer has a webcam, app (push) and email notifications about a print include a snapshot from the camera. SMS notifications never include a picture.

1. When you start a print, choose how you want to be notified, then tick the events under **Receive notification when...**: print done, failed print, cancelled print, start of print, pause, resume, and pause on filament runout.
2. Start the print.

**Check:** when one of those events happens, the app or email notification shows a picture of the printer.

SimplyPrint waits a moment after the event before taking the picture, so the print head has time to move out of the way. If the printer doesn't send a picture in time, the notification is sent without one.

## Related articles
- [Bambu Lab integration: webcam setup and usage guide](https://help.simplyprint.io/en/article/bambu-lab-integration-webcam-setup-and-usage-guide-u8nmfm/)
- [Changing webcam settings in SimplyPrint (flip and rotate webcam)](https://help.simplyprint.io/en/article/changing-webcam-settings-in-simplyprint-flip-and-rotate-webcam-1wvk18e/)
- [Watching a print from your phone](https://help.simplyprint.io/en/article/watching-a-print-from-your-phone-1ksq9ag/)
- [How to enable webcam streaming on the Snapmaker U1](https://help.simplyprint.io/en/article/how-to-enable-webcam-streaming-on-the-snapmaker-u1-ia9os7/)
- [Optimal camera setup and lighting for AI Failure Detection](https://help.simplyprint.io/en/article/optimal-camera-setup-and-lighting-for-best-ai-failure-detection-results-1eo262r/)