How to Uninstall SimplyPrint from the Creality Nebula Pad

Only for the older / alternative setup. If you connected your printer using the SimplyPrint Client, there is nothing to uninstall - the SimplyPrint Client connects to your printer wirelessly and never installs anything on the printer itself. To return the printer to normal, just quit or power off the device running the SimplyPrint Client; the printer is completely unchanged. The steps below apply only if you previously installed SimplyPrint directly on the Nebula Pad.


1. Download the Official Firmware

Download the latest firmware from Creality's own website: https://www.crealitycloud.com/downloads/other/type-24

The firmware file should be named similarly to NEBULA_ota_img_V1.1.0.30.img


2. Install the Official Firmware

  1. Transfer the firmware file to the USB stick that came with the Nebula Pad.
  2. Insert it into the Nebula and press the "Upgrade" button, once the firmware upgrade pop-up appears, and wait for the installation to finish:


That's it! SimplyPrint has now been removed from your Nebula Pad.

Updated on: 17/06/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!