Articles on: Connect & set up printers

The "Go to OctoPrint" button isn't showing

The "Go to OctoPrint" button isn't showing


On a printer's page in SimplyPrint, a Go to OctoPrint button opens the printer's own OctoPrint page in a new tab. Klipper printers get the same button as Go to Mainsail or Go to Fluidd. The button only appears when SimplyPrint can tell that you are on the same network as the printer, so it is often missing for a simple reason. This guide lists every condition, and how to open OctoPrint when the button isn't there.


In this article


Where the button is

Click a printer to open its page. The button sits on the right of the top bar, with the OctoPrint, Mainsail or Fluidd logo on it. It is only on the printer's page, not on the printer cards in your printer list.


When the button shows

All of these must be true:

  1. The printer runs OctoPrint, Mainsail or Fluidd. Printers that connect another way, such as Bambu Lab printers, don't have the button.
  2. The printer is online in SimplyPrint.
  3. You are on the same network as the printer. See the next section for how SimplyPrint decides this.
  4. SimplyPrint knows the printer's local IP address. It is filled in automatically, and you can see it under Printer settings > General > Local printer IP.
  5. Your user group has the Go to local permission. It is under Printing > Printer features in the group editor. The account owner always has it.
  6. You are not on a Hub. Hub screens never show the button.


How SimplyPrint decides you are on the same network

SimplyPrint compares two addresses: the internet address your browser connects from, and the internet address the printer connects from. If they are the same, you are treated as being on the same network and the button shows. It checks this when you open the printer's page.


That is why these all hide the button, even when you are sitting next to the printer:

  • A VPN on your computer or phone, or on the printer's Raspberry Pi.
  • Mobile data on your phone instead of the Wi-Fi the printer is on.
  • A separate network, such as a guest Wi-Fi or a school or office network that reaches the internet through a different connection than the printer.
  • IPv6 on one side only. If your browser reaches SimplyPrint over IPv6 while the printer uses IPv4 (or the other way around), the two addresses don't match.


Fix: the button is missing

  1. Check that the printer shows as online. If it is offline, see Why is my OctoPrint-powered printer offline?
  2. Turn off any VPN on your computer, and on a phone switch from mobile data to the printer's Wi-Fi.
  3. Reload the printer's page. SimplyPrint only checks the network when the page opens.


Check: the Go to OctoPrint button appears in the top bar.


Still missing? Open Printer settings > General and check that Local printer IP has a value. If you are not the account owner, ask an admin whether your user group has the Go to local permission. See User groups and permissions: what each one controls.


If none of that helps, your network probably reaches the internet in a way that makes the two addresses differ, such as the IPv6 case above. Open OctoPrint directly instead, as described below.


Fix: the button opens the wrong address

The button opens the address saved in Local printer IP. If the Raspberry Pi got a new IP address, or SimplyPrint picked up the wrong one:

  1. Open the printer's settings (the cog icon on the printer's page) and go to General.
  2. Enter the correct address in Local printer IP. It must be an IP address, not a host name like octopi.local. Add a port if OctoPrint doesn't run on the standard one, for example 192.168.1.50:5000.
  3. To stop SimplyPrint from overwriting it, turn off Update IP automatically.
  4. Save.


Check: the button now opens your OctoPrint page.


Giving the Raspberry Pi a fixed IP address, or a DHCP reservation, in your router keeps the address from changing again.


Open OctoPrint without the button

The button is only a shortcut. On a computer on the same network as the printer, type the Raspberry Pi's IP address into your browser, for example http://192.168.1.50. You can copy it from Printer settings > General > Local printer IP, or follow Find the IP of your Raspberry Pi.


Updated on: 28/10/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!